Identification Information Citation: Originator: U.S. Department of Agriculture, Soil Conservation Service Publication Date: 1994 Title: State Soil Geographic (STATSGO) data base for Texas Publication Information Publication Place: Fort Worth, Texas Publisher: U.S. Department of Agriculture, Soil Conservation Service Description Abstract: This data set is a digital general soil association map developed by the National Cooperative Soil Survey. It consists of a broad based inventory of soils and nonsoil areas that occur in a repeatable pattern on the landscape and that can be cartographically shown at the scale mapped. The soil maps for STATSGO are compiled by generalizing more detailed soil survey maps. Where more detailed soil survey maps are not available, data on geology, topography, vegetation, and climate are assembled, together with Land Remote Sensing Satellite (LANDSAT) images. Soils of like areas are studied, and the probable classification and extent of the soils are determined. Map unit composition for a STATSGO map is determined by transecting or sampling areas on the more detailed maps and expanding the data statistically to characterize the whole map unit. This data set consists of georeferenced digital map data and computerized attribute data. The map data are collected in 1- by 2-degree topographic quadrangle units and merged and distributed as statewide coverages. The soil map units are linked to attributes in the Map Unit Interpretations Record relational data base which gives the proportionate extent of the component soils and their properties. Purpose: STATSGO depicts information about soil features on or near the surface of the Earth. These data are collected as part of the National Cooperative Soil Survey. Time Period of Content Single Date/Time Calendar Date: 1994 Currentness Reference: publication date Status Progress: Complete Maintenance and Update Frequency: As needed Spatial Domain Bounding Coordinates West Bounding Coordinate: -108.0 East Bounding Coordinate: -92.0 North Bounding Coordinate: 37.0 South Bounding Coordinate: 25.0 Keywords Theme Theme Keyword Thesaurus: None Theme Keyword: Soils Theme Keyword: General Soils Map Theme Keyword: State Soil Geographic Theme Keyword: STATSGO Place Place Keyword Thesaurus: Counties and County Equivalents of the United States and the District of Columbia (FIPS Pub 6-3) Place Keyword: Texas (48) Access Constraints: None Use Constraints: The U.S. Department of Agriculture, Soil Conservation Service should be acknowledged as the data source in products derived from these data. STATSGO was designed primarily for regional, multicounty, river basin, State, and multistate resource planning, management, and monitoring. STATSGO data are not detailed enough to make interpretations at a county level. This soil survey product is not designed for use as a primary regulatory tool in permitting or citing decisions, but may be used as a reference source. The use of these data is not restricted and may be interpreted by organizations, agencies, units of government, or others; however, they are responsible for its appropriate application. Federal, State, or local regulatory bodies are not to reassign to the Soil Conservation Service any authority for the decisions that they make. The Soil Conservation Service will not perform any evaluations of these maps for purposes related solely to state or local regulatory programs. When STATSGO data are overlayed with other data layers, such as land use data, caution must be used in generating statistics on the co-occurence of the land use data with the soil data. The composition of the STATSGO map unit can be characterized independently for the land use and for the soil component, but there are no data on their joint occurrence at a more detailed level. Analysis of the overlayed data should be on a map polygon basis. Additional political, watershed, or other boundaries may be intersected with the soil data. Although the composition of each political and watershed unit may be described in terms of the STATSGO map units, information is not available to assign the components to the boundary units with full accuracy. As with the land use categories, the analysis should be restricted to the classified components. The approximate minimum area delineated is 625 hectares (1,544 acres), which is represented on a 1:250,000-scale map by an area approximately 1 cm by 1 cm (0.4 inch by 0.4 inch). Linear delineations are not less than 0.5 cm (0.2 inch) in width. The number of delineations per 1:250,000 quadrangle typically is 100 to 200, but may range up to 400. Delineations depict the dominant soils making up the landscape. Other dissimilar soils, too small to be delineated, are present within a delineation. Digital enlargements of these maps to scales greater than at which they were originally mapped can cause misinterpretation of the data. If enlarged, maps do not show the small areas of contrasting soils that could have been shown at a larger scale. The depicted soil boundaries, interpretations, and analysis derived from them do not eliminate the need for onsite sampling, testing, and detailed study of specific sites for intensive uses. Thus, these data and their interpretations are intended for planning purposes only. Attribute data for some data elements may be incomplete or missing. Where data are unavailable, a mask should be used to exclude the area from analysis. Digital data files are periodically updated. Files are dated, and users are responsible for obtaining the latest version of the data. Point of Contact Contact Organization Primary Contact Organization: U.S. Department of Agriculture, Soil Conservation Service Contact Position: State Soil Scientist Contact Address Address Type: mailing address Address: 101 South Main, Poage Federal Building City: Temple State or Province: Texas Postal Code: 76501-7682 Contact Voice Telephone: 817 774 1261 Contact Facsimile Telephone: 817 774 1388 Contact TDD/TTY: 202 720 7808 Data Quality Information Attribute Accuracy Attribute Accuracy Report: Attribute accuracy is tested by manual comparison of the source with hard copy plots and/or symbolized display of the map data on an interactive computer graphic system. Selected attributes that cannot be visually verified on plots or on screen are interactively queried and verified on screen. In addition, the attributes are tested against a master set of valid attributes. All attribute data conform to the attribute codes in the signed classification and correlation document and amendments and are current as of the date of digitizing. Logical Consistency Report: Certain node/geometry and topology (GT)-polygon/chain relationships are collected or generated to satisfy topological requirements. (The GT-polygon corresponds to the soil delineation). Some of these requirements include: chains must begin and end at nodes, chains must connect to each other at nodes, chains do not extend through nodes, left and right GT-polygons are defined for each chain element and are consistent throughout, and the chains representing the limits of the file (neatline) are free of gaps. The tests of logical consistency are performed using vendor software. The neatline is generated by connecting the explicitly entered four corners of the digital file. All data outside the enclosed region are ignored and all data crossing these geographically straight lines are clipped at the neatline. Data within a specified tolerance of the neatline are snapped to the neatline. Neatline straightening aligns the digitized edges of the digital data with the generated neatline (i.e., with the longitude/latitude lines in geographic coordinates). All internal polygons are tested for closure with vendor software and are checked on hard copy plots. All data are checked for common soil lines (i.e., adjacent polygons with the same label). Quadrangles are edge matched within the state, merged into a statewide data sets, and then edge matched to adjacent state data sets. Edge locations do not deviate from centerline to centerline by more than 0.01 inches. Completeness Report: A map unit is a collection of areas defined and named the same in terms of their soil and/or nonsoil areas. Each map unit differs in some respect from all others in a survey area and is uniquely identified. Each individual area is a delineation. Each map unit consists of one to 21 components. In those few areas where detailed maps did not exist, reconnaissance soil surveys were combined with data on geology, topography, vegetation, climate, and remote sensing images to delineate map units and estimate the percentages of components. The STATSGO map unit components are soil series phases, and their percent composition represents the estimated areal proportion of each within STATSGO map unit. The composition for a map unit is generalized to represent the statewide extent of that map unit and not the extent of any single map unit delineation. These specifications provide a nationally consistent representation of STATSGO attribute data. The actual composition and interpretive purity of the map unit delineations were based on statistical analysis of transect data. The composition was largely determined by measuring transects on detailed soil survey maps. The number of transects used was proportional to the relative size, number, and complexity of the delineations. The combined data on the length of the map units crossed by the transects were used to determine the percentages of the different soil and nonsoil areas in each map unit. Specific limits were established on the classification of soils and the design and name of map units. These limits are outlined in U.S. Department of Agriculture. 1975. Soil Taxonomy: A basic system of soil classification for making and interpreting soil surveys. Soil Conserv. Serv., U.S. Dep. Agric. Handb. 436.; U.S. Department of Agriculture. 1992. Keys to Soil Taxonomy. SMSS Technical Monograph No. 19. Soil Surv. Staff, Soil Conserv. Serv.; U.S. Department of Agriculture. 1993. National Soil Survey Handbook, title 430-VI. Soil Surv. Staff, Soil Conserv. Serv.; and U.S. Department of Agriculture. 1993. Soil Survey Manual. Soil Surv. Staff, U.S. Dep. Agric. Handbook 18. Adherence to National Cooperative Soil Survey standards and procedures is based on peer review, quality control, and quality assurance. Quality control is outlined in documents that reside with the Soil Conservation Service state soil scientist. Positional Accuracy Horizontal Positional Accuracy Horizontal Positional Accuracy Report: The accuracy of these digital data is based upon their compilation to base maps that meet National Map Accuracy Standards. The difference in positional accuracy between the map unit boundaries in the field and their digitized map locations is unknown. The locational acuracy of soil delineations on the ground varies with the transition between map units. For example, in areas where changes in soils, climate, topography, and geology occur subtly across a portion of a state, the transition between soil map unit boundaries will be gradual. Where these features change abruptly, such as from an area of foothills to a lake plain, the transition will be very narrow. Soil delineation boundaries were digitized within 0.01 inches of their locations on the digitizing source. The digital map elements are edge matched between data sets. The data along each state boundary are matched against the data for the adjacent state. Edge locations generally do not deviate from centerline to centerline by more than 0.01 inch. Lineage Source Information Source Citation Originator: U.S Department of Agriculture, Soil Conservation Service Title: multiple soil survey publications Geospatial Data Presentation Form: map Publication Information Publication Place: Washington, D.C. Publisher: U.S. Government Printing Office Type of Source Media: paper Source Currentness Reference: publication date Source Citation Abbreviation: SCS1 Source Contribution: base information for development of map unit delineations and transect data for naming map units Source Citation Originator: U.S Department of Agriculture, Soil Conservation Service Title: multiple reconnaissance, county, and State general soil maps Geospatial Data Presentation Form: map Publication Information Publication Place: Washington, D.C. Publisher: U.S. Government Printing Office Type of Source Media: paper Source Currentness Reference: publication date Source Citation Abbreviation: SCS2 Source Contribution: reference information for development of map unit delineations and transect data for naming map units where detailed surveys did not exist Source Citation Originator: U.S. Geological Survey Title: multiple maps Geospatial Data Presentation Form: map Publication Information Publication Place: Reston, Virginia Publisher: U.S. Geological Survey Source Scale Denominator: 250000 Type of Source Material: stable-base material Source Currentness Reference: publication date Source Citation Abbreviation: USGS1 Source Contribution: base materials for compilation of map unit delineation linework Source Citation Originator: U.S Department of Agriculture, Soil Conservation Service Title: multiple compiled mylar overlays of map unit delineations, unpublished Geospatial Data Presentation Form: annotated overlay Type of Source Media: stable-base material Source Currentness Reference: unknown Source Citation Abbreviation: SCS3 Source Contribution: digitizing source Process Step Process Description: Map unit composition was determined by transecting or sampling areas on the more detailed soil maps and expanding the data statistically to characterize the whole map unit. Source Used Citation Abbreviation: SCS1 Process Date: 1994 Process Step Process Description: Soil map unit lines and symbols were drafted in red pencil on a mylar overlay that was punch registered to fit the mylar USGS 1:250,000-scale topographic quadrangle. A detailed and complete edit was performed on all overlays before digitizing. The soil delineation overlays were raster scanned at a scanning resolution of at least 0.01 inches and converted to a vector format or were manually digitized on a digitizing tablet with a resolution of at least 0.001 inches. Four control points corresponding to the four corners of the quadrangles were used for registration during data collection. The control points were either explicitly entered or developed by the software. The data sets were edge matched and merged into statewide coverages. A detailed and complete edit was performed on all digital data. Source Used Citation Abbreviation: USGS1, SCS3 Process Date: 1994 Spatial Data Organization Information Direct Spatial Reference Method: Vector Spatial Reference Information Horizontal Coordinate System Definition Planar Grid Coordinate System Name: Albers Conical Equal Area Standard Parallel: 29.50 Standard Parallel: 45.50 Longitude of Central Meridian: -96.0 Latitude of Projection Origin: 23.0 False Easting: 0.0 False Northing: 0.0 Planar Coordinate Information Planar Coordinate Encoding Method: coordinate pair Coordinate Representation Abscissa Resolution: 6.35 Ordinate Resolution: 6.35 Planar Distance Units: meters Geodetic Model Horizontal Datum Name: North American Datum of 1927 Ellipsoid Name: Clarke 1866 Semi-major Axis: 6378206.4 Denominator of Flattening Ratio: 294.9786982 Entity and Attribute Information Overview Description Entity and Attribute Overview: Map Unit Delineations are closed polygons that are generally geographic mixtures of groups of soils or soils and nonsoil areas. The map unit ID uniquely identifies each closed delineation, map unit. Each map unit ID is linked to a map unit name. The map unit ID is also the key for linking information in the Map Unit Interpretations Record tables. Map Unit Delineations are described by the Map Unit Interpretations Record data base. This attribute data base gives the proportionate extent of the component soils and the properties for each soil. The data base contains both estimated and measured data on the physical and chemical soil properties and soil interpretations for engineering, water management, recreation, agronomic, woodland, range and wildlife uses of the soil. The Soil Map Unit Interpretations Record data base consist of the following relational tables: codes (data base codes) - stores information on all codes used in the data base comp (map unit component) - stores information which will apply to a specific component of a soil map unit compyld (component crop yield) - stores crop yield information for soil map unit components forest (forest understory) - stores information for plant cover as forest understory for soil map unit components interp (interpretation) - stores soil interpretation ratings (both limitation ratings and suitability ratings) to soil map unit components layer (soil layer) - stores characteristics which apply to soil layers for soil map unit components mapunit (map unit) - stores information which applies to all components of a soil map unit plantcom (plant composition) - stores plant symbols and percent of plant composition associated with components of soil map units plantnm (plant name) - stores the common and scientific names for plants used in the data base rsprod (range site production) - stores range site production information for soil map unit components taxclass (taxonomic classification) - stores the taxonomic classification for soils in the data base windbrk (windbreak) - stores information on recommended windbreak plants for soil map unit components wlhabit (wildlife habitat) - stores wildlife habitat information for soil map unit components woodland (woodland) - store information on common indicator trees for soil map unit components woodmgt (woodland management) - stores woodland management information for soil map unit components yldunits (yield units) - stores crop names and the units used to measure yield Entity and Attribute Detail Citation U.S. Department of Agriculture. 1975. Soil Taxonomy: A basic system of soil classification for making and interpreting soil surveys. Soil Conserv. Serv., U.S. Dep. Agric. Handb. 436. U.S. Department of Agriculture. 1992. Keys to Soil Taxonomy. SMSS Technical Monograph No. 19. Soil Surv. Staff, Soil Conserv. Serv. U.S. Department of Agriculture. 1993. National Soil Survey Handbook, title 430-VI. Soil Surv. Staff, Soil Conserv. Serv. U.S. Department of Agriculture. 1993. Soil Survey Manual. Soil Surv. Staff, U.S. Dep. Agric. Handbook 18. U.S. Department of Agriculture. 1993. National Soil Survey Handbook, title 430-VI. Soil Surv. Staff, Soil Conserv. Serv. U.S. Department of Agriculture. 1994. State Soil Geographic (STATSGO) Data Base: Data use information. Soil Conserv. Serv. U.S. Department of Agriculture. State Soil Survey Database Data Dictionary. Soil Conserv. Serv. Distribution Information Distributor Contact Organization Primary Contact Organization: U.S. Department of Agriculture, Soil Conservation Service, National Cartography and GIS Center Contact Address Address Type: mailing address Address: P.O. Box 6567 City: Fort Worth State or Province: Texas Postal Zone: 76115 Contact Voice Telephone: 817 334 5559 Contact Facsimile Telephone: 817 334 5469 Resource Description: Texas STATSGO Distribution Liability: Although these data have been processed successfully on a computer system at the U.S Department of Agriculture, no warranty expressed or implied is made by the Agency regarding the utility of the data on any other system, nor shall the act of distribution constitute any such warranty. The U.S. Department of Agriculture will warrant the delivery of this product in computer-readable format, and will offer appropriate adjustment of credit when the product is determined unreadable by correctly adjusted computer input peripherals, or when the physical medium is delivered in damaged condition. Request for adjustment of credit must be made within 90 days from the date of this shipment from the ordering site. The U.S. Department of Agriculture, nor any of its agencies are liable for misuse of the data. It is also not liable for damage, transmission of viruses, or computer contamination through the distribution of these data sets. The U.S. Department of Agriculture prohibits discrimination in its programs on the basis of race, color, national origin, sex, religion, age, disability, political beliefs, and marital or familial status. (Not all prohibited bases apply to all programs.) Standard Order Process Non-digital Form: Not available Digital Form Digital Transfer Information Format Name: DLG Format Date: 19920508 Format Specification: Optional Format Content Information: spatial and keys Transfer Size: 15.7 Digital Form Digital Transfer Information Format Name: ASCII Format Content Information: keys and attributes Transfer Size: 9.0 Digital Form Digital Transfer Information Format Name: ARCE Format Content Information: spatial, keys, and attributes Format Specification: Single precision Transfer Size: Digital Transfer Option Offline Option Offline Media: 8mm cartridge tape Recording Capacity Recording Density: 2.3 Recording Density Units: gigabytes Recording Format: tar Digital Transfer Option Offline Option Offline Media: 1/4-inch cartridge tape Recording Capacity Recording Density: 150 Recording Density Units: megabytes Recording Format: tar Fees: The charge for one data set is $500.00. A data set is one state in a state-wide format and includes both spatial and attribute data. Ordering Instructions: Call or write to organizations listed under Distributor. Spatial line data are in DLG-3 optional or ARC Export formats. Digital line graph files contain major and minor code pairs in area and line records. A conversion legend is provided for each digital line graph file. Map unit IDs are available in a companion ASCII attribute file. The Map Unit Interpretations Record attribute soil data are available in variable length, tab delimited, ASCII or ARC Export files. Turnaround: 10 working days Metadata Reference Information Metadata Date: 19940311 Metadata Review Date: 19940329 Metadata Future Review Date: 19950329 Metadata Contact Contact Organization Primary Contact Organization: U.S. Department of Agriculture, Soil Conservation Service Contact Position: State Soil Scientist Contact Address Address Type: mailing address Address: 101 South Main, Poage Federal Building City: Temple State or Province: Texas Postal Code: 76501-7682 Contact Voice Telephone: 817 774 1261 Contact Facsimile Telephone: 817 774 1388 Metadata Standard Name: Content Standards for Digital Geospatial Metadata Metadata Standard Version: 19940608